How to pair or connect a wireless mouse to a system via Bluetooth or USB Dongle (2024)

1. Push the slider switch to Bluetooth mode.

   

2. Press and hold the two side buttons, the DPI stage up, and the DPI stage down buttons simultaneously for three seconds to activate pairing mode. The status indicator will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device.

4. Search for new Bluetooth devices.

5. Select “DA V2 X” from the list of devices found.

6. Wait until the mouse pairs with your device. When paired, the status indicator will briefly turn static blue.

   

1. Push the slider switch to Bluetooth mode.

   

2. Press and hold the two side buttons and the DPI stage up button simultaneously for three seconds to activate pairing mode. The Razer logo will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device, search for new Bluetooth devices, and select “Razer DeathAdder V2 Pro” from the list of devices found.

4. Wait until the mouse pairs with your device. When paired, the Razer logo will briefly turn static blue before displaying its current lighting effect.

   

1. Push the slider switch to Bluetooth mode.

   

2. Press and hold the scroll wheel, DPI stage up, and DPI stage down buttons simultaneously for three seconds to activate pairing mode. The Razer logo will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device, search for new Bluetooth devices, and select "Razer Naga Pro" from the list of devices found.

4. Wait until the mouse pairs with your device. When paired, the Razer logo will briefly turn static blue before displaying its current lighting effect.

   

   Note: Once paired, your Razer Naga Pro will automatically reconnect to your device whenever in Bluetooth mode and within range.

5. Keep the pairing devices within proximity of each other for a faster and more stable connection.

   Your Razer Naga Pro is now connected to your PC via Bluetooth and ready to use.

1. Push the slider switch to Bluetooth mode.

   

   See Also

   Viper V2 pro dongle not working | Razer InsiderRazer Viper V2 Pro Dongle Stopped Working | Razer InsiderRazer Viper V2 pro dongle not working | Razer InsiderRazer Viper v2 Pro Dongle not Connecting | Razer Insider

2. Press and hold the two side buttons and the DPI cycle button simultaneously for three seconds to activate pairing mode. The status indicator will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device and select “Razer Orochi V2” from the list of devices found.

   

4. Wait until the mouse pairs with your device. When paired, the status indicator will briefly turn static blue.

   

   Note: Once paired, your Razer Orochi V2 will automatically reconnect to your device whenever in Bluetooth mode and within range.

5. Keep the pairing devices within proximity of each other for a faster and more stable connection.

Note: You can connect the Razer Pro Click to more than one device.

1. Switch the slider at the bottom of the mouse to Bluetooth mode

   

2. Select a slot for your Bluetooth device by tapping the pair/switch button. The slots allow you to pair up to three Bluetooth devices on your Razer Pro Click.

   

3. Press and hold the pair/switch button for three seconds. The pairing indicator will blink twice in repeated intervals to show that the device is in pairing mode.

   

4. Activate Bluetooth on your device and search for "Razer Pro Click" from the list of devices found.

   

5. Wait until both devices are paired. When paired, the pairing indicator will change to static for three seconds before turning off.

   

Once both devices have been paired, your Razer Pro Click will automatically reconnect to the device whenever it is in Bluetooth mode and the device is within range.

1. Push the slider switch to Bluetooth mode.

   

2. Press the pair/switch button to select a slot for your Bluetooth device. You can pair up to three Bluetooth devices on your Razer Pro Click Mini. The pairing indicator will blink twice in repeated intervals to show that the mouse is in pairing mode.

   

3. Activate Bluetooth on your device and select "ProClick M" from the list of devices found.

4. Wait until both devices are paired. When paired, the pairing indicator will briefly change to static before turning off.

   

1. Switch the slider to Bluetooth mode.

   

2. Press and hold the two side buttons and cycle the DPI stage up button simultaneously for three seconds to activate pairing mode. The status indicator will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device and search for "Razer Basilisk X Hyperspeed" from the list of devices found.

   

4. Wait until both devices are paired. When paired, the status indicator will change to static blue for two seconds before turning off.

   

1. Push the slider switch to Bluetooth mode.

   

2. Press and hold the scroll wheel and thetwo side buttons simultaneously for 3 seconds to activate pairing mode. The scroll wheel and Razer logo will blink twice in repeated intervals to show that the device is in pairing mode.

   

3. Activate Bluetooth on your device and select "Razer Basilisk V3 Pro" from the list of devices found.

   

4. Wait until both devices are paired. The scroll wheel and the Razer logo will briefly turn static blue when paired.

   

1. Remove the top cover of the mouse and take out the wireless dongle.

   

2. Close the top cover and insert the wireless dongle into any of the USB ports on your PC.

   

3. Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode. When connected, the status indicator will briefly turn static green.

   

1. Remove the compartment cover from the mouse to remove the wireless USB dongle.

   

2. Reattach the compartment cover and insert the wireless USB dongle into the USB port of your PC.

   

3. Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode.

   

1. Remove the attached side plate from the mouse to remove the wireless USB dongle.

   

2. Reattach the side plate and insert the wireless USB dongle into the USB port of the PC.

   

3. If you have purchased the Razer Mouse Dock Chroma, follow these steps toconnect the Razer Naga Pro wirelessly with the charging dock:

   1. Plug the charging cable from the computer's USB port to the charging dock.

      

   2. Insert the wireless dongle from the Razer Naga Pro to the USB port of the Razer Mouse Dock.

      

      Note: With this setup, the included USB dongle adapter is no longer needed. The Razer Mouse Dock Chroma acts as both an extender and charging dock.

4. Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode.

   

   The Razer Naga Pro is now ready for use in wireless mode.

1. Remove the top cover of the mouse and take out the wireless USB dongle.

   

2. Close the top cover and insert the wireless USB dongle into the USB port of your PC.

   

3. Push the slider switch to Razer™ HyperSpeed Wireless (2.4 GHz) mode. When connected, the status indicator will briefly turn static green.

   

1. Remove the compartment cover of the Razer Pro Click and pull out the wireless USB dongle.

   

2. Close the compartment cover and connect the wireless USB dongle to the USB port of your computer.

   

3. Switch the slider to 2.4 GHz mode. The pairing indicator will start blinking rapidly.

   

4. Wait until the mouse automatically pairs with the wireless USB dongle. When paired, the pairing indicator will change to static white for 3 seconds before turning off.

1. Remove the top cover of the mouse and take out the Razer™ Productivity Dongle.

   

2. Close the top cover and insert the Razer™ Productivity dongle into the USB port of your PC.

   

3. Push the slider switch to Razer™ HyperSpeed wireless (2.4 GHz) mode. When connected, the pairing indicator will briefly turn static white.

   

1. Plug the wireless USB dongle into your PC.

   

2. Press and hold the Power / DPI cycle button for three seconds to power the mouse on.

   

Your Razer Viper V2 Pro is now ready for use in wireless mode.

1. Remove the top cover of the Razer Basilisk X Hyperspeed and take the wireless USB dongle.

   

2. Close the top cover and connect the wireless USB dongle to the USB port of your computer.

   

3. Switch the slider to 2.4 GHz mode. The pairing indicator will start blinking rapidly.

   

4. Wait until the mouse automatically pairs with the wireless USB dongle. When paired, the pairing indicator will change to static white for 3 seconds before turning off.

   

1. Plug the wireless USB dongle into your PC.

   

2. Push the slider switch to "2.4" GHz mode.

   

The Razer Basilisk V3 Pro is now ready for use in wireless mode.