Wet & Forget Exterior Glass & Window Cleaner (2024)

INSTRUCTIONS FOR USE: 1. Connect your garden hose to the sprayer via the black nozzle screw. 2.The blue end spray tip has two settings for how the liquid disperses, take the small blue tip, and rotate it so the black nib is inserted into the circle outing for a jet spray, or alternatively insert into the whistle shaped outing for a flat fan spray. The jet spray is for distance & height and the flat spray is for general application. 3. After choosing your desired dispensing method, turn your water supply on at the water tap. 4. Turn the bottle tap on by turning the black nozzle so the arrow points at the ‘ON’ setting. This setting mixes and dilutes the solution ready to dispense. 5. Apply the product to the windows, moving quickly to avoid wastage. Do not do too many windows at a time, we recommend doing a wash and rinse one window at a time. 6. For best results we recommend you lightly agitate the window surface after spraying the product using a microfibre pad or window brush to remove excess dirt and grime. 7. Do not allow the product to dry on the glass or joinery before rinsing. Turn the black nozzle to the ‘WATER’ position and thoroughly rinse above and to the outer sides of your original soap line to avoid streaking. Rinse from top to bottom removing all suds.

PLEASE NOTE: Do not apply this product in direct sunlight or onto warm glass. If your finished result has whiteish residue or streaking on the windows, it is because of your rinse down method. You will need to repeat the process as per the instructions above to rectify this issue.

On mid to darker colour steel & joinery apply to an inconspicuous small section. Rinse and let dry to ensure there is no colour change, as sometimes if the surface is oxidised, it may leave a stain.