Tips
Washing the engine can make servicing easier and allow you to more easily diagnose any faults. In addition, a clean engine looks more aesthetically pleasing compared to an engine covered with oil and road dirt. How to clean the drive unit so as not to damage it and what engine cleaning preparation should be used?
Every car fan will be happy when they look under the hood and see their engine is impeccably clean. Drivers of off-road vehicles may be particularly happy. Such cars get dirty extremely quickly. However, they are much better adapted to this purpose than the cars that we all use on the road every day.
It is worth realizing that when necessity touches us engine washing, this activity may often bring more harm than good. It seems that washing the engine and its components under the hood is simple, but the truth may surprise you. It turns out that this needs to be approached with truly surgical precision. Why? You will learn about it in this article!
What is the purpose of washing a car engine?
In simple translation, under the hood it should be possible to clean and clean at all times. Apart from the engine itself, there are many other components related to it that do not necessarily tolerate dirt, dust or moisture. However, when it comes to the engine itself, it is worth knowing that washing it has both advantages and disadvantages.
The advantages of washing a car engine include:
- maintaining the engine's aesthetics at a high level,
- cleaning and unblocking the necessary engine air vents,
- discovering places of fluid leaks,
- discovering other faults.
My Car Engine Self Start Moto Start Where to buy View product Moje Car Engine cleaner Where to buy View product My Auro Detailer APC All Purpose Cleaner Where to buy View product
Apart from these obvious advantages, there are even more advantages. During washing, all defects are revealed not only in the engine, but also in other seemingly unrelated components.
In addition to the advantages, washing the engine may also have some disadvantages, including:
- moisture in the ignition device, which results in starting problems,
- moisture in air filters,
- damaging electrical and electronic components located in the immediate vicinity of the engine.
- moisture and damage to electrical cables, especially worn-out ones,
- moisture in exposed mechanical mechanisms,
As can be seenwashing the engine, although often necessary, requires high precision so as not to cause faults instead of cleaning. Sometimes washing the engine becomes necessary. How to do this?
How to prepare your car for engine washing?
Before cleaning the engine, we should properly protect the drive unit and other components located in the chamber. What is worth remembering?
Above all, we cannot wash the engine when it is hot. Pouring cold water on a hot unit may cause serious damage to the engine, e.g. cracking the head. In addition, cleaning the engine while it is still warm poses a risk of burns.
The electrical system must be secured. This is especially important for cars powered by gasoline engines. These types of units need a spark to burn the fuel-air mixture.
For this reason, a gasoline engine is equipped with a system consisting of spark plugs, coils, high-voltage cables and a distributor that is sensitive to moisture. Diesel engines have a simpler and more water-resistant design.
We can protect high-voltage cables, the distributor and other elements of the ignition system with food foil. Erasers and adhesive tape may be useful.
We also protect the alternator, control computer and fuse box. Disconnect the battery terminals. We can either cover the battery or simply remove it from the engine compartment when cleaning the engine.
It may also be a good idea to protect the intake system. We should not allow the air filter to get wet. We can dismantle it and put it into the cover after washing.
Washing a car engine
How to wash a car engine?
You should know that a pressure washer, although very effective, will not always work. It may harm the engine, especially one with a relatively old design. Although new types of engines can withstand pressurized water well, older designs may suffer. This may include damage to seals or water getting into sensitive mechanisms. Unfortunately, you have to be careful about this. It is equally important not to use overly aggressive cleaning chemicals. Yes, they remove even old and stuck dirt, but their use must be carefully considered.
Also read:Engine overheating – learn about the symptoms and effects of an overheated car engine
Washing the oil pans and lower parts of the engine is a good idea. However, parts that come into contact with sensitive components are not necessarily safe. In such situations, it will be better for the engine to wash it manually and precisely remove impurities than to wash it mechanically, which is quite risky. It is worth paying close attention to washing exposed drive and toothed belts. They are durable elements, but in contact with harmful chemicals they may lose their properties and lead to premature failure. The same applies to cleaning places that are connected and require the use of seals. There are many such places, and washing with the first cleaning agent may damage the seals, lose the tightness of the connections and lead to faults and damage.
What engine cleaning fluid will be useful when cleaning?
The drive unit should not be washed using standard cleaning agents, such as dishwashing liquid. It is also not recommended to use aggressive preparations that may destroy plastic or rubber.
It is best to choose a specialized oneengine cleaning preparation, with a composition that is safe for the components contained in the chamber. What are the characteristics of a good engine cleaner?
First of all, it should help us remove all greasy stains and impurities. The engine cleaner will remove traces of grease and oil.
It is also important that, despite its cleaning properties, a good quality engine cleaner will be safe for rubber components. When using this type of fluid, we do not risk damaging the seals.
What should you do after washing the engine?
After applying the liquid towashing engines the drive unit should be rinsed with water. We can use a sponge soaked in water, a hose or a pressure washer for this purpose.
When doing this, remember not to direct the jet at the electrical installation elements. If we use a lance or hose, set the pressure to low. The rinsing itself should be as short as possible.
Do not start the engine immediately after cleaning. We wait until the water drains. It is best to let the drive unit dry for a few hours, if possible - with the hood open. We can support the drying process. We can use a compressor or a can of compressed air.
Is it worth washing the engine yourself?
As we mentioned, when washing the engine, you need to take into account water-sensitive components. These include the alternator, filters and fuel supply electronics. When washing the engine, it is impossible not to splash water on them. Even though they are sometimes well protected (except for the alternator), contact with pressurized water may affect their functionality. So should you wash the engine yourself or should you entrust this task to someone who does it every day?
Washing is not completely safe for the engine, so maybe it is worth entrusting this task to an experienced person? Such a person not only has the appropriate equipment, knowledge and practice, but also realizes the risk of thoughtlessly pouring water on everything around him. Therefore, anyone who is not confident in undertaking this task on their own should entrust it to a specialist. In addition, you can learn much more about the condition of your vehicle when a specialist takes a look at its components and mechanisms.
So washing the engine is not as easy and safe as some people imagine. However, when undertaking this task, you must be sure that you will be able to complete it safely.
