Types of Electrical Boxes (2024)

Specific boxes are designed for indoor or outdoor use, while others are made for installation behind or outside of walls.They can contain light switches, wires or outlets.

• Handy Box: Mounts on the surface of a wall. Can contain light switches or receptacles. Ideal for areas where behind-the-wall installation is difficult or impossible.
• Junction Box: Wires connect only to each other, never to a switch, receptacle or fixture. Allows circuits to safely split and branch into different directions.
• New Work Box: Installed as part of a new construction project. Mounts directly to studs or joists, or is placed between two studs using a bar hanger before applying drywall.
• Old Work Box: Also called a “remodeling box.” Installed on drywall after it has been hung. Has clamps built into the box and is ideal for adding new outlets to pre-existing walls.
• Outdoor Box: Available in metal and nonmetallic units. Protects wiring from the elements with gaskets, sealed seams and watertight covers.

Tip: Electrical code requires that all electrical boxes are fitted with box covers. Exterior covers must be watertight.

The shape of an electrical box can help you identify its purpose. Different electrical box sizes fit varying installation needs.

A standard rectangular shape is the most common electrical box. It houses a single electrical switch or outlet and comes in metal or nonmetallic units. These boxes protect wiring from the elements with gaskets, sealed seams and watertight covers.

A square electrical box, also known as a “double-gang box,” houses two devices. They'll have a combination outlet/switch or a pair of outlets/switches inside.

The round or octagonal box houses lightweight fixtures or safety devices in the ceiling. These are used for lights or smoke and carbon monoxide alarms.

A ceiling box is for heavier fixtures, such as ceiling fans or chandeliers. Be sure to choose a ceiling box that is made to support extra weight.

Electrical boxes are constructed of metallic or nonmetallic material. Metal boxes are usually made of aluminum, steel or cast iron. The boxes made without metal are PVC or plastic.

Metal Boxes:

• Many local building codes require metal junction boxes because they are durable and ensure long-lasting performance.
• Choose from many junction box sizes to find the one that best suits your project.
• Use for exposed indoor applications, such as with conduit in an unfinished basem*nt.

Plastic or PVC Boxes:

• These boxes are inexpensive and easy to install.
• Plastic electrical boxes can be placed behind drywall.
• Use only with nonmetallic cable.

Always check with your local building inspector before starting any electrical project. They'll ensure that you are following code.

• For new construction installations, diagram the room and be sure you have enough electrical boxes to accommodate all the light switches, outlets and fixtures you need. Assure that the electrical box sizes you chose match the locations where you need them.
• When working in finished areas, use a stud finder to locate studs. Make sure they don't interfere with the placement of a new box.
• Trace an outline of the box on the wall where it will be installed to mark cutting lines. Utility knives work well for cutting holes in drywall, and keyhole saws are good for plaster. Try using a saber saw for wood.
• Light switches are generally installed about 42 inches from the floor.
• Power outlets are generally installed 12 inches from the floor.
• Plan for future changes by clearly labeling all wires.