SVG Properties In CSS Guide | CSS-Tricks (2024)

Text properties

Clip properties

Masking properties

Filter effects

Gradient properties

Interactivity properties

Color properties

Painting properties

While presentation attributes can be used as CSS properties to style SVG, what about controlling the coordinates and dimensions of SVG elements using CSS? SVG 2, which is in Candidate Recommendation at the time of this writing, makes it is possible to style and animate these properties.

The SVG 2 specification states:

Some styling properties can be specified not only in style sheets and ‘style‘ attributes, but also in presentation attributes. These are attributes whose name matches (or is similar to) a given CSS property and whose value is parsed as a value of that property.”

Not only does it mean that SVG properties can be styled using CSS as presentation attributes or in style sheets, but this also can be applied to CSS pseudo-classes such as :hover or :active.

SVG 2 also introduces more presentation attributes that can be used as styling properties. These attributes can be found in SVG 2 specification.

It is important to note that not every SVG element will support the same CSS properties. Much like how there are CSS properties that can be applied to certain SVG elements, there are specific properties that are supported by certain SVG elements.

For example, the <circle> or <ellipse> elements support the cxand cyproperties as coordinates of the center of the shape. The element also supports the rx and ry properties as the radius, but the element cannot use these properties.

Geometry properties

In SVG 2, properties such as rx and ry are defined as geometry properties. Geometry properties can be used as CSS properties, just like presentation attributes such as fill or stroke properties. These CSS properties and the corresponding SVG elements include:

SVG 2 also makes it is possible to position SVG elements using CSS. Let’s begin with drawing a rectangle shape having the following SVG:

<svg width="170" height="170"> <rect x="10" y="10" width="150" height="150" /></svg>

And the following CSS:

rect { fill: #6e40aa;}

This will produce a rectangle shape with its coordinates set to 10, 10. With SVG 2,xandycan be applied as CSS properties:

/* This will work with SVG 2 */rect { x: 10; y: 10; ...}

The SVG code would be reduced to this:

<svg width="170" height="170"> <rect width="150" height="150" /></svg>

You can even set thewidthandheightfor the<rect>element using CSS like so:

rect { ... width: 150px; height: 150px; ...}

That leaves us with just the following for SVG markup:

<svg width="170" height="170"> <rect /></svg>

At the time of writing, the following demos will work in Blink (e.g. Chrome and Opera) and WebKit (e.g. Safari) browsers as these browsers support SVG 2 features. Until then, let’s dive into how to override SVG properties using CSS.

The element can be overridden with CSS to create shape morphing.

The SVG paths that morph one into the other must have the same commands and same number of points or else the morphing will not work.

Let’s start with drawing a element in the shape of a triangle. Using the d property will specify the shape of the element:

<svg height="220" width="300"> <path d="M150 10 L40 200 L260 200Z" /></svg>

To get the triangle to morph into a different shape, let’s override the SVG element with the d property with CSS:

path { d: path("M150, 10 L40, 200 L260, 200Z"); fill: #4c6edb;}

Let’s also add a :active pseudo-class to the property so when the element is clicked, the shape will morph into a square and change its fill color. Let’s also add a transition property to make the shape morphing action appear smooth. Here is the CSS:

path:active { d: path("M150, 10 L40, 200 L260, 200 L260, 200Z"); fill: #4c6edb; transition: all 0.35s ease;}

And the SVG would be:

<svg height="220" width="300"> <path /></svg>

Want another demo? Here is a cool demo from Chris Coyier demonstrating SVG shape morphing on hover!

SVG properties can be animated using CSS through CSS animations and transitions.

In this demo, we will draw various SVG elements and create a wave animation. Start by drawing five elements:

<svg width="350" height="250"> <circle class="shape" /> <circle class="shape" /> <circle class="shape" /> <circle class="shape" /> <circle class="shape" /></svg>

We’ll be using CSS variables and :nth-child() CSS pseudo-class to define each .shape class. The .shape class will have a cy of 50 and a r of 20. Each of the .shape classes will have their own cx and fill CSS properties set:

:root { --color-1: #6e40aa; --color-2: #4c6edb; --color-3: #24aad8; --color-4: #1ac7c2; --color-5: #1ddea3;}.shape { cy: 50; r: 20;}.shape:nth-child(1) { cx: 60; fill: var(--color-1);}.shape:nth-child(2) { cx: 120; fill: var(--color-2);}.shape:nth-child(3) { cx: 180; fill: var(--color-3);}.shape:nth-child(4) { cx: 240; fill: var(--color-4);}.shape:nth-child(5) { cx: 300; fill: var(--color-5);}

Here is how it should look so far.

Now it’s time to animate! Start by using @keyframes rule to define the moveCircle animation:

@keyframes moveCircle { 50% { cy: 150; r: 13; }}

This will get each element to change their cy coordinates from 50 to 150 and r from 20 to 13. Add the following to the CSS to the .shape class get the animation running infinitely:

.shape { ... animation: moveCircle 1250ms ease-in-out both infinite;}

Finally, add an animation-delay to each of the .shape classes to the CSS with the exception of .shape:nth-child(1) like this:

.shape:nth-child(2) { ... animation-delay: 100ms;}.shape:nth-child(3) { ... animation-delay: 200ms;}.shape:nth-child(4) { ... animation-delay: 300ms;}.shape:nth-child(5) { ... animation-delay: 400ms;}

Shapes in SVG<pattern>elements can also be animated using CSS. Here is a cool demo by Dudley Storey showcasing that!