Setting Up and Using Multi-factor Authentication (MFA) (2024)

To help protect your DISCO account, we strongly suggest enabling Multi-factor authentication (MFA).

In This Article:

• What is multi-factor authentication?
• Why should I use multi-factor authentication?
• Enabling multi-factor authentication on your DISCO
• Setting up multi-factor authentication
  • Step 1: Add your DISCO account to your authenticator app
  • Step 2: Enter the six-digit code from your authenticator app into DISCO
• Resetting multi-factor authentication
• Frequently Asked Questions

What is multi-factor authentication?

Multi-factor authentication (MFA),is an extra security measure that can be enabled on an online account. After entering a username and password to log into an account, MFA requires users to present one or more additional types of authentication to decrease the chances of the account being compromised.

Most commonly, this is in the form of entering a dynamic six-digit verification code. These verification codes are generated by a separate authentication app, such as Google Authenticator, Microsoft Authenticator, and others.

Why should I use multi-factor authentication?

In many cases, passwords alone are not enough to protect online accounts. With MFA enabled, even if a hacker has your password, they won't be able to log into your account unless they have the device with your authenticator app to access the verification codes.

Enabling multi-factor authentication on your DISCO

Note: When MFA is enabled for one DISCO, if there are users on that DISCO who use the same email address to log into other DISCOs, they will also be prompted to use MFA when logging into those other DISCOs.

Setting up multi-factor authentication

When MFA is first enabled on your DISCO, all users in your DISCO will see the following setup prompt the next time they go to log in, just after entering their username and password:

Notes:

• The prompt will contain a unique QR code and Secret for each user. The screenshots in this article are for demonstration purposes only.
• Although the prompt mentions Google Authenticator, you are not required to use this specific app. You can use any authenticator app you prefer.

Before beginning the setup process, you will need to:

• Choose an authentication device
  You can use a mobile device or computer.
• Save your Secret from DISCO
  Also known as a Secret Key, this is the code shown in the MFA setup prompt in DISCO.This code is generated during the setup process and is unique to each user. Keep it in a safe place anddo notshare it with anyone.
  It will come in handy if you ever lose your authentication device, as you will need it to set up MFA again on another device.
• Install an authentication app or extension
  On mobile:
  You can install an authentication app from the Google Play Store (Android) or App Store (iOS). Two well-known authenticator apps are Google Authenticator andMicrosoft Authenticator, but any authenticator app will do.
  On your computer:
  You can use a desktop app, or add an extension to your web browser. Some password managers (e.g. 1Password, etc.) have authentication features built-in for desktop and browser use.

Step 1: Add your DISCO account to your authenticator app

For the sake of simplicity, we have provided instructions below using Google Authenticator and Microsoft Authenticator on a mobile device.

Set up MFA using Google Authenticator on a mobile device:

1. Open the Google Authenticator app on your mobile device.
2. To add a new account, tap the plus sign icon on the bottom right.
   
3. TapScan a QR code*. This will open up your camera in barcode scanning mode.
   
4. Hold your mobile device up to your computer screen, with the QR code centered in your camera.
   
5. A new entry will be created for your DISCO account with a six-digit code underneath it.
   
6. The code will be valid for 30 seconds until it is replaced by another code, and so on. The timer to the right of the code indicates when the code is about to expire.
   Tip: If the code is red, it is best to wait for the next code.
   *Alternatively, you can tap Enter a setup key, and enter the Secret key from the prompt in your DISCO.
   
   

Set up MFA using Microsoft Authenticator on a mobile device:

1. Open the Microsoft Authenticator app on your mobile device.
2. To add a new account, tap the plus sign icon on the top right.
3. TapOther (Google, Facebook, etc.).
   
4. This will open up your camera in barcode scanning mode*.
5. Hold your mobile device up to your computer screen, with the QR code centered in your camera.
   
6. A new entry will be created for your DISCO account.
   Note: The entry name will not reference DISCO when created. To rename it, tap on the entry, then tap the gear icon.
   Tap Account name, edit the name, and tapDone.
   
7. To access the code, tap on the new account entry.
8. The code will be valid for 30 seconds until it is replaced by another code, and so on. The timer to the left of the code indicates when the code is about to expire.
   *Alternatively, you can tap Or enter code manually, and enter the Secret key from the prompt in your DISCO.

Step 2: Enter the six-digit code from your authenticator app into DISCO

Type or paste the code from your authenticator app, and click Verify.

You will then be logged in to your DISCO and a message will appear in the bottom left corner to confirm MFA has been activated:

Resetting multi-factor authentication

If you no longer have access to the device you set up MFA with or you need to set up a new device, your MFA credentials must be reset.

For security purposes, you will need to send an email to our support team at [email protected].

We will require verification from one of the administrators on your account, so to expedite matters it's helpful to CC one of your DISCO's administrators on the email.

To find out who your account administrators are, head to the My Teampage in your settings.

If you are an administrator, we will require verification from another administrator.

If you are the only administrator on your DISCO, we will use other means to verify your request.

Frequently Asked Questions

Do I have to use Google Authenticator? Can I use another app?
Our MFA system is compatible with other authenticator apps, such as Okta Verify, Authy, Lastpass, and Microsoft Authenticator. We suggest checking with your IT team to see what they recommend.

I have Google Authenticator set up, but DISCO refuses to take my code.
Each code is only valid for about 30 seconds. Make sure to enter the code quickly, before a new code is generated. If you continue to have problems, please contact Support.

What if I'm a member of more than one DISCO?
Provided you are using the same email account to login, you can use the same MFA codes for any DISCO you are a member of. Note that you will only be prompted for an MFA code on the DISCO's that have the MFA requirement enabled.

MFA is enabled on our DISCO, but I'm using DISCO and it hasn't prompted me to set it up yet.
To prevent disruption in your workflow, you will be prompted to set up MFA the first time you log in after it has been enabled on your DISCO. If you'd like to set it up immediately, please log out and log back in.