Rock | Definition, Characteristics, Formation, Cycle, Classification, Types, & Facts (2024)

Rock types

Igneous rocks are those that solidify from magma, a molten mixture of rock-forming minerals and usually volatiles such as gases and steam. Since their constituent minerals are crystallized from molten material, igneous rocks are formed at high temperatures. They originate from processes deep within the Earth—typically at depths of about 50 to 200 kilometres (30 to 120 miles)—in the mid- to lower-crust or in the upper mantle. Igneous rocks are subdivided into two categories: intrusive (emplaced in the crust), and extrusive (extruded onto the surface of the land or ocean bottom), in which case the cooling molten material is called lava.

Sedimentary rocks are those that are deposited and lithified (compacted and cemented together) at the Earth’s surface, with the assistance of running water, wind, ice, or living organisms. Most are deposited from the land surface to the bottoms of lakes, rivers, and oceans. Sedimentary rocks are generally stratified—i.e., they have layering. Layers may be distinguished by differences in colour, particle size, type of cement, or internal arrangement.

Metamorphic rocks are those formed by changes in preexisting rocks under the influence of high temperature, pressure, and chemically active solutions. The changes can be chemical (compositional) and physical (textural) in character. Metamorphic rocks are often formed by processes deep within the Earth that produce new minerals, textures, and crystal structures. The recrystallization that takes place does so essentially in the solid state, rather than by complete remelting, and can be aided by ductile deformation and the presence of interstitial fluids such as water. Metamorphism often produces apparent layering, or banding, because of the segregation of minerals into separate bands. Metamorphic processes can also occur at the Earth’s surface due to meteorite impact events and pyrometamorphism taking place near burning coal seams ignited by lightning strikes.

Rock cycle

Geologic materials—mineral crystals and their host rock types—are cycled through various forms. The process depends on temperature, pressure, time, and changes in environmental conditions in the Earth’s crust and at its surface. The rock cycle illustrated in Figure 1 reflects the basic relationships among igneous, metamorphic, and sedimentary rocks. Erosion includes weathering (the physical and chemical breakdown of minerals) and transportation to a site of deposition. Diagenesis is, as previously explained, the process of forming sedimentary rock by compaction and natural cementation of grains, or crystallization from water or solutions, or recrystallization. The conversion of sediment to rock is termed lithification.

Classification by grain or crystal size

The common textural terms used for rock types with respect to the size of the grains or crystals, are given in the Table. The particle-size categories are derived from the Udden-Wentworth scale developed for sediment. For igneous and metamorphic rocks, the terms are generally used as modifiers—e.g., medium-grained granite. Aphanitic is a descriptive term for small crystals, and phaneritic for larger ones. Very coarse crystals (those larger than 3 centimetres, or 1.2 inches) are termed pegmatitic.

For sedimentary rocks, the broad categories of sediment size are coarse (greater than 2 millimetres, or 0.08 inch), medium (between 2 and 1/16 millimetres), and fine (under 1/16 millimetre). The latter includes silt and clay, which both have a size indistinguishable by the human eye and are also termed dust. Most shales (the lithified version of clay) contain some silt. Pyroclastic rocks are those formed from clastic (from the Greek word for broken) material ejected from volcanoes. Blocks are fragments broken from solid rock, while bombs are molten when ejected.

Porosity

The term rock refers to the bulk volume of the material, including the grains or crystals as well as the contained void space. The volumetric portion of bulk rock that is not occupied by grains, crystals, or natural cementing material is termed porosity. That is to say, porosity is the ratio of void volume to the bulk volume (grains plus void space). This void space consists of pore space between grains or crystals, in addition to crack space. In sedimentary rocks, the amount of pore space depends on the degree of compaction of the sediment (with compaction generally increasing with depth of burial), on the packing arrangement and shape of grains, on the amount of cementation, and on the degree of sorting. Typical cements are siliceous, calcareous or carbonate, or iron-bearing minerals.

Sorting is the tendency of sedimentary rocks to have grains that are similarly sized—i.e., to have a narrow range of sizes (see Figure 2). Poorly sorted sediment displays a wide range of grain sizes and hence has decreased porosity. Well-sorted indicates a grain size distribution that is fairly uniform. Depending on the type of close-packing of the grains, porosity can be substantial. It should be noted that in engineering usage—e.g., geotechnical or civil engineering—the terminology is phrased oppositely and is referred to as grading. A well-graded sediment is a (geologically) poorly sorted one, and a poorly graded sediment is a well-sorted one.

Total porosity encompasses all the void space, including those pores that are interconnected to the surface of the sample as well as those that are sealed off by natural cement or other obstructions. Thus the total porosity (ϕ_T) iswhere Vol_G is the volume of grains (and cement, if any) and Vol_B is the total bulk volume. Alternatively, one can calculate ϕ_T from the measured densities of the bulk rock and of the (mono)mineralic constituent. Thus,where ρ_B is the density of the bulk rock and ρ_G is the density of the grains (i.e., the mineral, if the composition is monomineralogic and hom*ogeneous). For example, if a sandstone has a ρ_B of 2.38 grams per cubic centimetre (g/cm³) and is composed of quartz (SiO₂) grains having ρ_G of 2.65 g/cm³, the total porosity is

Apparent (effective, or net) porosity is the proportion of void space that excludes the sealed-off pores. It thus measures the pore volume that is effectively interconnected and accessible to the surface of the sample, which is important when considering the storage and movement of subsurface fluids such as petroleum, groundwater, or contaminated fluids.