How to Minimize or Eliminate RF Interference?
Eliminating RF interference requires not only a good understanding of its causes but also a structuredapproach supported by RF planning software.
Most WiFi equipment vendors advise users who are experiencing problems with RF interference to simply switch to a different WiFi channel, one that’s less busy. While sound in theory, this advice often fails to deliver the desired results in practice because there are only three non-interfering WiFi channels in the 2.4 GHz band.
What’s more, switching to a different WiFi channel only solves continuous RF interference produced by other WiFi networks. To guarantee flawless performance, it’s also necessary to deal with intermitted RF interference by improving the so-called Signal-to-Noise (SNR) Ratio, a measure used in science and engineering that compares the level of a desired signal to the level of background noise.
eliminating
sources of RF
interference
There are two ways how SNR can be improved: either by decreasing interference or increasing signal gain. The former can be accomplished by eliminating as many sources of RF interference as possible or, in some cases, by using the 5 GHz band. The latter can be accomplished by increasing the power or density of WiFi access points.
Regardless of the chosen approach, an RF interference scanner should be used to gather supporting information and help determine the best possible course of action for minimizing or eliminating RF interference. This can be achieved with the help of the right RF interference WiFi tool.
