freeSSHd 1.2 and earlier allows remote attackers to cause a denial of service (crash) via a SSH2_MSG_NEWKEYS packet to TCP port 22, which triggers a NULL pointer dereference.
References: [CVE-2008-0852] [BID-27845] [SECUNIA-29002]
The SSH service on Dell PowerConnect 3348 1.2.1.3, 3524p 2.0.0.48, and 5324 2.0.1.4 switches allows remote attackers to cause a denial of service (device reset) or possibly execute arbitrary code by sending many packets to TCP port 22.
References: [CVE-2013-3594], [XFDB-90595], [BID-65070]
RUCKUS could allow a remote attacker to bypass security restrictions. An unauthenticated remote attacker with network access to port 22 can tunnel random TCP traffic to other hosts on the network via Ruckus devices. A remote attacker could exploit this vulnerability to bypass security restrictions and gain unauthorized access to the vulnerable application.
References: [XFDB-84626]
360 Systems contains a default hard-coded password in the image server series. By logging into the device via TCP port 22, a remote attacker could gain root privileges on the system to modify or upload video to play immediately and affect the emergency broadcast system in the United States.
References: [XFDB-82650], [BID-58338], [CVE-2012-4702]
Improper checks for unusual or exceptional conditions in Brocade NetIron 05.8.00 and later releases up to and including 06.1.00, when the Management Module is continuously scanned on port 22, may allow attackers to cause a denial of service (crash and reload) of the management module.
References: [CVE-2016-8209], [XFDB-125665]
A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.
References: [CVE-2017-3819], [BID-96913]
Including port 22 in the list of allowed FTP ports in Networking in Google Chrome prior to 65.0.3325.146 allowed a remote attacker to potentially enumerate internal host services via a crafted HTML page.
References: [CVE-2018-6082], [BID-103297]
A vulnerability has been identified in ROX II (All versions < V2.12.1). An authenticated attacker with a high-privileged user account access via SSH could circumvent restrictions in place and execute arbitrary operating system commands. Successful exploitation requires that the attacker has network access to the SSH interface in on port 22/tcp. The attacker must be authenticated to exploit the vulnerability. The vulnerability could allow an attacker to execute arbitrary code on the device.
References: [CVE-2018-13802], [BID-105545]
A vulnerability has been identified in ROX II (All versions < V2.12.1). An attacker with network access to port 22/tcp and valid low-privileged user credentials for the target device could perform a privilege escalation and gain root privileges. Successful exploitation requires user privileges of a low-privileged user but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system.
References: [CVE-2018-13801], [BID-105545]
The Auto-Maskin DCU 210E firmware contains an undocumented Dropbear SSH server, v2015.55, configured to listen on Port 22 while the DCU is running. The Dropbear server is configured with a hard-coded user name and password combination of root / amroot. The server is configured to use password only authentication not cryptographic keys, however the firmware image contains an RSA host-key for the server. An attacker can exploit this vulnerability to gain root access to the Angstrom Linux operating system and modify any binaries or configuration files in the firmware. Affected releases are Auto-Maskin DCU-210E RP-210E: Versions prior to 3.7 on ARMv7.
References: [CVE-2018-5399]
An issue was discovered in Valve Steam Link build 643. When the SSH daemon is enabled for local development, the device is publicly available via IPv6 TCP port 22 over the internet (with stateless address autoconfiguration) by default, which makes it easier for remote attackers to obtain access by guessing 24 bits of the MAC address and attempting a root login. This can be exploited in conjunction with CVE-2017-17878.
References: [CVE-2017-17877]
A vulnerability has been identified in SCALANCE SC-600 (V2.0). An authenticated attacker with access to port 22/tcp as well as physical access to an affected device may trigger the device to allow execution of arbitrary commands. The security vulnerability could be exploited by an authenticated attacker with physical access to the affected device. No user interaction is required to exploit this vulnerability. The vulnerability impacts the confidentiality, integrity and availability of the affected device.
References: [CVE-2019-10928]
Honeywell ControlEdge through R151.1 uses Hard-coded Credentials. According to FSCT-2022-0056, there is a Honeywell ControlEdge hardcoded credentials issue. The affected components are characterized as: SSH. The potential impact is: Remote code execution, manipulate configuration, denial of service. The Honeywell ControlEdge PLC and RTU product line exposes an SSH service on port 22/TCP. Login as root to this service is permitted and credentials for the root user are hardcoded without automatically changing them upon first commissioning. The credentials for the SSH service are hardcoded in the firmware. The credentials grant an attacker access to a root shell on the PLC/RTU, allowing for remote code execution, configuration manipulation and denial of service.
References: [CVE-2022-30318]
Backdoor.Win32.Bingle.b / Weak Hardcoded Credentials - the malware is packed using ASPack 2.11, listens on TCP port 22 and requires authentication. However, the password "let me in" is weak and hardcoded within the PE file. Unpacking the executable, easily reveals the cleartext password.
References: [MVID-2022-0643]
Some trojans also use this port: InCommand, Shaft, Skun
