Page 17 | [GUIDE] Win10/11 solutions for eGPU detection, BSO... (2025)

(@wawan19)

New Member

Joined: 4 months ago

August 28, 2024 11:37 am

i just bought th3p4g3 eGPU with rtx 4060 and enermax 750w psu semi modular.

my laptop is acer nitro v15 anv15

all the begining the setup work flawless only thunderbolt slow charger message appear after i plug.

but after playing 10 minutes my laptop are freeze, i hard reboot my laptop and after booting

my thunder bolt 4 eGPU th3p4 display no longer detected and stuck on blue led , gpu fan not spining

ussualy it's going green and gpu fan is spinning and no longer message for slow charging from windows.

already re-install all nvidia driver and try another port but still no luck.

need help if anyone have same symtoms when using th3p4

my setup laptop -Tb4- th3p4 -rtx4060- hdmi- monitor

(@wawan19)

New Member

Joined: 4 months ago

August 31, 2024 12:43 am

i just bought th3p4g3 eGPU with rtx 4060 and enermax 750w psu semi modular.

my laptop is acer nitro v15 anv15

all the begining the setup work flawless only thunderbolt slow charger message appear after i plug.

but after playing 10 minutes my laptop are freeze, i hard reboot my laptop and after booting

my thunder bolt 4 eGPU th3p4 display no longer detected and stuck on blue led , gpu fan not spining

ussualy it's going green and gpu fan is spinning and no longer message for slow charging from windows.

already re-install all nvidia driver and try another port but still no luck.

need help if anyone have same symtoms when using th3p4

(@5ko)

New Member

Joined: 5 months ago

August 31, 2024 2:42 am

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

(@solo761)

New Member

Joined: 4 months ago

August 31, 2024 2:13 pm

Hello all.

I'm new at eGPU stuff so I might be missing something obvious here.

I have Aoostar GOD78 mini PC. It has Ryzen 7840HS, and it has one USB4 port on the front. Win11 Pro is installed, everything works fine, all drivers are installed.
I've bought TH3P4G3 eGPU dock. Assembled it with ATX PSU (600W) and I've plugged my old GTX 1060-6GB into it for test run. But when I plug it in Mini PC doesn't react at all.

When I flip PSU power switch blue led turns on. When i plug USB4 cable (tried with one that came with it, and also one other I have, also 50 cm) into mini PC and other end into dock's USB C marked with battery and lightning (PD connector) on DOCK LED goes green and PSU/GPU fan starts turning.

So far everything looks fine but apart from that nothing happens. Under Display adapters I only have integrated 780M GPU and generally Device Manager doesn't show any change when connecting it or disconnecting it. I tried plugging it in while PC is turned off, and while it's on and no change.
Also, if I connect it to other USB-C connector, with only lightning icon, nothing happens. LED remains blue.

Only reaction I managed to get from it was when I connected monitor via USB-C to DP cable to other (only lightning) connector on TH3P4G3 dock, Device manager saw another monitor connected, but monitor didn't turn on. If I connect it via same cable directly to mini PC monitor turns on and works fine as secondary monitor.

Is there something else I need to install for this to work? Or some option in mini PC bios? (it was advertised that it supports external GPUs)
Or am I just "lucky" that my TH3P4G3 is faulty 😬.

*edit*

Desparate times call for desparate measures, just tried installing Intel Thunderbolt Control Center, but no change.

This post was modified 4 months ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

(@tristan_cooke)

New Member

Joined: 4 months ago

August 31, 2024 2:47 pm

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

(@oscar_sanabria)

New Member

Joined: 4 months ago

September 6, 2024 4:51 am

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.