How to Sew Up Holes: Easy Fixes and Repairs (2024)

Co-authored byAndrea Beaulieuand Luke Smith, MFA

Last Updated: June 24, 2024Fact Checked

ARTICLE

VIDEO

Things You Should Know

Download Article

1. 1

   Pick a thick needle for tough fabrics, and a thin needle for soft fabrics. If the fabric is thick and tough (like denim, leather, or multi-layered cloth), use a sharp, heavy needle to pierce the cloth without too much effort. If the fabric is soft or thin (like cotton or nylon), use a thinner, more delicate needle. To be sure you're using the right needle, check the packaging to see what kind of fabric it's recommended for.^[1]

   • The larger the needle, the smaller the “gauge.” For example, an 8-gauge needle is very thick, so it's best for heavy, woven materials. A 16-gauge needle is very thin, so it's suited for more delicate fabrics.^[2]
   • Use a needle with a rounded tip for knits and a needle with a sharp tip for woven fabrics.^[3]
2. 

   2

   Cut a length of thread about 2.5 times longer than the hole. For larger holes, the rule of thumb is that you’ll need about 2.5 times more thread than the size of the hole.^[4] For smaller holes (up to about 2in (5.1cm)) go ahead and cut about 24in (61cm) of thread—this will give you ample slack to comfortably make the stitches and tie off the fix.^[5]

   • To better hide the stitches, use a thread that’s similar in color to the fabric.

   Advertisem*nt

3. 

   3

   Thread the needle and knot the thread. Pull the thread through the needle so that you have 2 threads of equal length on either side of the eye of the needle. Then, tie the two ends together about 0.5–1in (1.3–2.5cm) from the tips with a simple knot—tying an overhand knot will do.^[6]

   • Double or even triple tie the knot when mending fabrics with looser weaves to ensure the knot doesn’t slip through the fabric.
   • If the thread’s tip is frayed, snip it about 1in (2.5cm) down from the frayed end, or simply lick it to get a cleaner tip before you thread the needle. Alternatively, use a needle threader if you’re having trouble.

Advertisem*nt

Download Article

1. 

   1

   Turn the garment inside out and expose the hole. Turning the fabric inside-out gives you better access to the hole, and also makes it so that when you stitch it up, the stitch will be invisible. When you’ve found the hole, go ahead and snip away any loose threads.^[7]

   • Use this method to fix holes up to about 1in (2.5cm) wide—stitching wider holes without a patch may pucker or disform the garment.
   • This method can be used to simple tears up to about 4–5in (10–13cm), where you just need to join 2 edges of a rip.
2. 

   2

   Make the first stitch at one end of the hole. Pinch the edges of the hole together, so that they’re aligned on the inside of the garment. Then, insert the needle about 2mm (0.079in) from the edge at one end of the hole, fastening both edges together and pulling the thread all the way through so that the knot is stopped by the fabric. Then, thread the tip of the needle back up through the edges about 2mm (0.079in) along the tear.^[8]

   • Optionally, wear a thimble or 2 to protect your fingertips as you work.
3. 

   3

   Backstitch to the end of the hole. To backstitch, insert the needle halfway along the stitch you just created, and then reinsert it so that it emerges another half length after the end of the first stitch. Repeat this stitch until you reach the end of the hole, and the tear is fastened shut.^[9]

4. 

   4

   Loop the needle through the final stitch to tie off the thread. To finish sewing, make one last stitch, inserting the needle and pulling it through. Before you tighten it, though, thread the needle through the loop created by the partial stitch, and then pull it tight. Make another 1 or 2 stitches this way, threading the needle through the same hole and inserting it into the loop each time to tie off the thread. Then snip off the thread just above the new knot, and your hole is fixed!^[10]

See Also
No-Sew Alternatives to Sewing10 Common Articles Of Clothing And Their Origins - ListverseThe Different Types Of Auto Repair Garages10 fantastic different types of mending clothes - isifiso

Advertisem*nt

Download Article

1. 

   1

   Measure the length and width of the hole. Use a ruler or soft measuring tape to find the measurements for the largest parts of the tear or hole. Larger holes need to be reinforced by a patch, so we’ll use these measurements to gauge the size of the patch.^[11]

2. 

   2

   Cut a patch about 1.5in (3.8cm) larger than the hole. Use the same or a similar material as the garment itself, matching both the color and weight. Make sure the patch is big enough to cover the entire hole, and then some. You don’t have to cut it to shape, just a square or circle will do.^[12]

   • Patches come in many common fabric types, like denim or cotton. You might also use a bit of scrap fabric from another piece of clothing.
   • Many menders opt to use a decorative fabric instead—it’s difficult to make invisible fixes to large holes, so why not show off your handiwork, instead?
3. 

   3

   Pin the patch in place on the underside of the garment. Bring the edges of the hole as close together as possible, so that the fabric lays flat and doesn’t pucker. Then, use sewing pins to temporarily fasten your patch in place on the inside of the garment, so that the patch peeks up through the tears.^[13]

4. 

   4

   Use a running stitch around the perimeter of the patch. Insert the needle up from the underside of the patch, then sink it down through the fabric again about 0.25in (6.4mm) along the edge of the patch, joining the patch to the garment. Then, bring the needle up through the fabric about 0.25in (6.4mm) from the last stitch, creating a dotted line, or “running stitch.” Continue this stitch all the way around the edge of the patch.^[14]

   • Stitch at least about 1in (2.5cm) from the edge of the tears, if possible.
5. 

   5

   Strengthen the torn edges with rows of running stitches. If your hole has irregularly-shaped tears, sew them down to the patch by laying them flat across the patch, then sewing back-and-forth lines of running stitches all along the area of the patch, keeping each row about 0.25 inches (0.64cm) away from the next.^[15]

   • If the hole is especially frayed, reinforce it with a liquid seam sealant before you start stitching. This can help make the fix more durable.
6. 

   6

   Thread the needle through your last stitch to tie off and cut the thread. Once you’ve secured the patch to the garment with ample running stitches, loop the needle through your last stitch, and pull it tight to tie it off. Repeat this 1-2 more times to secure the thread, then snip it away just above the knot.^[16]

   • To better hide the fix, iron on a decorative patch over the mended hole.
   • Embroider a design onto the patched hole to give your handiwork some flair and add some character to the garment.

Advertisem*nt

Expert Q&A

Ask a Question

Video

Reader Videos

Tips

Thanks for submitting a tip for review!

Things You'll Need

29 votes - 76%