FAQs
Finding the Service Tag using the Windows Command Prompt
How to get service tag from cmd? ›
Type cmd in the Windows search bar at the bottom-left of the screen, then select Command Prompt from the list of results. In the Command Prompt window, type wmic bios get serialnumber and press Enter . The Service Tag (Serial Number) appears as shown in the image below.
How do I find my system service tag? ›
Type cmd in the Windows search bar at the bottom-left of the screen, then select Command Prompt from the list of results. In the Command Prompt window, type wmic bios get serialnumber and press Enter . The Service Tag (Serial Number) appears as shown in the image below.
How to find service in cmd? ›
Top Windows command-line commands
If you're looking for a specific service, you can use sc query service_name. To find the configuration information for a specific service, you can use sc qc service_name. To stop a particular service from running on a computer, use sc \\computername stop service_name.
How to find the system serial number in cmd? ›
Open the Command Prompt by pressing the Windows key on your keyboard, then pressing X. A menu will appear. Select Command Prompt (Admin) on the menu. Type wmic bios get serial number and then press Enter on your keyboard.
How do I access services from Command Prompt? ›
Use the Command Prompt.
- Open the Command Prompt. Press the Start ( ...
- In the Command Prompt window, type services. msc and hit ↵ Enter .
What is a service tag? ›
A service tag is a unique identifier assigned to a specific hardware product, like a computer or a printer. It's like a digital fingerprint that helps support teams identify your device and provide accurate assistance.
Are serial number and service tag the same? ›
All computers should have the Serial Number/Service Tag listed somewhere on the computer's case. For Dell computers, it is referred to as a Service Tag, for HP computers, it is referred to as a Serial Number, and for Mac computers, it is referred to as a Serial.
What is the command for System Information? ›
While on the Start screen, type msinfo32. (Alternatively, swipe in from the right edge of the screen and select Search. If you are using a mouse, point to the lower-right corner of the screen, and then select Search. Then type msinfo32 in the Search box.)
Where to find service tag on HP? ›
HP Laptop: Around 9 digits, the serial number is located on the bottom of the device where it says "S/N#." HP All in One: Around 10 digits, the serial number is located on the bottom edge of the back of the computer.
The netstat command generates displays that show network status and protocol statistics. You can display the status of TCP and UDP endpoints in table format, routing table information, and interface information.
How to start a service from Command Prompt? ›
Use a command prompt
- To start a service, type: net start ServiceName.
- To stop a service, type: net stop ServiceName.
- To pause a service, type: net pause ServiceName.
- To resume a service, type: net continue ServiceName.
How to check service status command? ›
To check a service's status, use the systemctl status service-name command. I like systemd's status because of the detail given. For example, in the above listing, you see the full path to the unit file, the status, the start command, and the latest status changes.
How to check serial key using cmd? ›
Here's how to do it:
- Access Command Prompt: Press the Windows key + S to open the search bar. Type “cmd” into the search bar. ...
- Enter the command: Once the Command Prompt window is open, type or copy and paste the following command: wmic path softwareLicensingService get OA3xOriginalProductKey. ...
- View your product key:
How do I find my computer's serial number? ›
Windows
- Press Win + R (open Run.)
- Enter "cmd" and select OK.
- Enter "wmic bios get serialnumber" into the command line window that appears.
How to get service name in Windows command? ›
To find the service name and display name of each service on your system, type Get-Service . The service names appear in the Name column, and the display names appear in the DisplayName column.
How to get service tag in Linux using cmd? ›
Finding the Service Tag using the Linux terminal
- Open terminal using the keyboard shortcut CTRL + ALT + T.
- To get the Service Tag, type sudo dmidecode -s system-serial-number and press Enter. NOTE: To run a sudo command, you must log in as a superuser or administrator. When prompted, enter the administrator password.
How to access registry from cmd? ›
To open Command Prompt on Windows installation, you must press SHIFT+F10. After opening the Command Prompt type regedit and you will have access to the Windows Registry Editor.
How to get asset tag from cmd? ›
Method 4 - service tag from command line
- Select Start , type cmd, select Command Prompt.
- Wait for the command prompt window to open, then type wmic bios get serialnumber and press Enter.
- Send us the value displayed.