Step to generate an RSA PEM (asymmetric) key pair for use with SimpleBackups Encryption
Generating and Using RSA Keys for SimpleBackups This guide will walk you through the steps to generate an RSA private key and derive the corresponding public key for use with SimpleBackups.
Step 1: Generate the Private Key Open a terminal. Run the following command to generate a private RSA key: openssl genrsa -aes256 -out private-key.pem 4096
You will be prompted to enter a password (we recommend securing your keys with a passphrase). Generating RSA private key, 4096 bit long modulus...Enter pass phrase for private-key.pem:
Alternative: Generate RSA Key with PSA256 If you need to generate a private key using the PSA256 algorithm, use the following command:
openssl genpkey -algorithm RSA -out private-key-psa256.pem -pkeyopt rsa_keygen_bits:4096 -aes256
You will be prompted to enter a password as well.
Step 2: Obtain the PEM Public Key Use the following command to derive the public key from your private key: openssl rsa -in private-key.pem -pubout -out public-key.pem
openssl rsa -in private-key-psa256.pem -pubout -out public-key-psa256.pem
View the contents of the public-key.pem
or public-key-psa256.pem
file using: cat public-key.pem
cat public-key-psa256.pem
Copy the contents of the respective public key file and paste them into SimpleBackups' encryption key field. Additional Notes 🔒
Security : Ensure that your private key ( private-key.pem
or private-key-psa256.pem
) is stored securely. The passphrase adds an additional layer of security
⚙
Usage : The public key ( public-key.pem
or public-key-psa256.pem
) will be used by SimpleBackups for encryption purposes. Only share the public key with trusted entities.
Did this answer your question?
Last updated on July 8, 2024
FAQs
We recommend using OpenSSL to generate a 2048-bit RSA key pair.
Generate a private key and a public key in PEM. You should safeguard the private key and never share it, not even with Auth0: ... Extract the public key in PEM format using the following command. ... Save the PEM file.
How do I generate an RSA key? ›
Generate RSA Keys
Open a shell using Putty or another utility. Use commands to generate an RSA key file. Type the following command to generate RSA keys: ssh-keygen -t rsa. ... Navigate to the. rsakey. folder that you created in step 2b. ... Locate the public key beginning with. ssh. and copy the key.
How to generate RSA key pair in OpenSSL? ›
Procedure
Once installed, run the OpenSSL command prompt. Type openssl to start the application. To generate a new RSA private key, type: genrsa -out {path_to_pem_file} 2048. ... To generate a public key, type: rsa -pubout -in {path_private_pem} -out (path_public_pem)
How to generate 2048 bit RSA key pair? ›
To download PuTTY or PuTTYgen, go to http://www.putty.org/ and click the You can download PuTTY here link.
Run the PuTTYgen program. ... Set the Type of key to generate option to SSH-2 RSA. In the Number of bits in a generated key box, enter 2048. Click Generate to generate a public/private key pair.
Which command is used to generate RSA keys? ›
In the command prompt, use the ssh-keygen command: By default, the system will save the keys to [your home directory]/.ssh/id_rsa. Unless you are an expert you should use the default option and press Enter.
How to generate RSA key without password? ›
Answer
ssh-keygen -t rsa. Note: When you generate these keys, do not enter a passphrase. [root@cae .ssh]# ssh-keygen -t rsa. Enter file in which to save the key (/root/.ssh/id_rsa): /root/.ssh/my_id. [root@cae .ssh]#cd /root/.ssh/ [root@cae .ssh]# ls. [root@cae .ssh]# ssh-copy-id -i my_id.pub root@tf2.
How to generate a key pair? ›
To create a key pair on Microsoft Windows operating systems:
Download PuTTy Key Generator PuTTygen.exe file and run it. In the Key menu, select SSH-2 RSA Key. In Parameters, select the RSA option. In Number of bits in generated key field, enter at least 2048, ideally 4096. In Actions, select Generate.
How long does it take to generate a RSA key? ›
It takes approximately 5 seconds to generate a 1024-bit-length RSA key pair, then encrypt and decrypt the random message. This time can vary for each execution.
How to generate PEM certificate in OpenSSL? ›
How to Generate a . pem File From a Private Key?
Open a terminal or command prompt. Navigate to the directory with your private key. Run this command: openssl rsa -in private.key -outform PEM -out private.pem.
How do you generate a key using RSA algorithm? ›
The keys for the RSA algorithm are generated in the following way:
Choose two large prime numbers p and q. ... Compute n = pq. ... Compute λ(n), where λ is Carmichael's totient function. ... Choose an integer e such that 1 < e < λ(n) and gcd(e, λ(n)) = 1; that is, e and λ(n) are coprime.
Procedure 9.1. Create a Private/Public Key Pair with Keytool
Run the keytool -genkey -alias ALIAS -keyalg ALGORITHM -validity DAYS -keystore server.keystore -storetype TYPE command: ... If the specified keystore already exists, enter the existing password for that keystore, otherwise enter a new password:
How do I set up a RSA key? ›
Procedure
Use the ssh-keygen tool to create a key pair. ... Validate that the keys were generated. ... Enable key-based authentication in the /etc/ssh directory on the SSH server. ... Copy the rsa. ... If you have an existing authorized_keys file, edit it to remove any no-pty restrictions.
How to generate an encryption key using OpenSSL? ›
In Windows:
Open the Command Prompt (Start > Programs > Accessories > Command Prompt). Navigate to the following folder: C:\Program Files\ListManager\tclweb\bin\certs. Type the following: openssl genrsa -out rsa.private 1024. Press ENTER. The private key is generated and saved in a file named "rsa.
How to generate certificate and private key in OpenSSL? ›
Right-click the openssl.exe file and select Run as administrator. Enter the following command to begin generating a certificate and private key: req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -keyout privateKey. key -out certificate .
How do I convert a key to PEM format? ›
Use the following command to convert an RSA key file to a .pem format file:
Syntax: openssl rsa -in <path-to-key-file> -text <path-to-PEM-file> Example: openssl rsa -in C:\Certificates\serverKeyFile.key -text > serverKeyFileInPemFormat.pem.
How do I export a certificate for that key to PEM format? ›
On the Windows system, open Certificate Manager (certmgr.exe). Right-click the certificate to export and select All Tasks > Export. Select options in the Certificate Export Wizard .
How to generate RSA key in Mac? ›
Generate an SSH Key Pair
Open a new Terminal window. Type ssh-keygen -b 4096 -t rsa. You will be prompted to enter a filename. By default, your keys will be saved as id_rsa and id_rsa.pub. ... When prompted, enter a passphrase. This will created a hidden directory called . ssh that contains both your public (id_rsa.
How to generate private key from PEM file online? ›
Generating a private key
Windows. Openssl> genrsa -out key-filename.pem -aes256 -passout pass:Passw0rd1 2048. Linux. $ openssl genrsa -out key-filename.pem -aes256 -passout pass:Passw0rd1 2048.
Article information
Author : Dong Thiel
Last Updated : 2024-09-20T12:56:53+07:00
Views : 6577
Rating : 4.9 / 5 (79 voted)
Reviews : 86% of readers found this page helpful
Author information
Name : Dong Thiel
Birthday : 2001-07-14
Address : 2865 Kasha Unions, West Corrinne, AK 05708-1071
Phone : +3512198379449
Job : Design Planner
Hobby : Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing
Introduction : My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.