2. Connect the bridge to your network
If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly. The DAP-1522 supports WPS, as do most D-Link routers.
Look for the Wi-Fi Protected Setup (WPS) logo on your router to make sure it supports this preferred security standard. Otherwise, you’ll need to connect the bridge to your PC via Ethernet to configure your bridge. On your PC, open a web browser and enter http://dlinkap or http://192.168.0.50 to load the bridge’s web configuration screen.
Next, on the bridge’s web configuration screen, use the setup tool to connect the bridge to your wireless network. The tool lists the active SSIDs it can find. Pick your network’s identifier, enter the password, and select Finish to reboot the bridge. Now you can disconnect the Ethernet cable between the bridge and your PC.
