How to drain the washing machine in emergency cases? (2024)

FAQs

How to drain the washing machine in emergency cases? ›

Press the "Start/Pause" button on your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you'll be able to open the door and make any changes to the cycle. To resume the cycle, press the “Start/Pause” button again.

Press the "Start/Pause" button on your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you'll be able to open the door and make any changes to the cycle. To resume the cycle, press the “Start/Pause” button again.

If you have a drain pump filter, put your shallow container against the washing machine under the filter to catch the water. Turn the knob slowly until the water starts flowing. Each time you fill the container, turn the knob off and empty it into a sink and repeat the process until all the water has been drained.

Turn off the power to the washing machine by unplugging it from the wall outlet or turning off the circuit breaker that controls the washer. Open the lid of the washing machine and use a cup or scoop to remove as much water as possible from the tub. Pour the water into a bucket or other container.

While the Washer is operating, turn the Cycle Selector knob to "Spin Only" or "Drain and Spin." The Washer will stop and reset the cycle to the new selection.

In most cases, you have two options for draining water from your washer. Option one is to connect the drain hose to a standpipe, and option two is to place the drain hose in a nearby sink.

If the Water is Staying in the Washing Machine

The issue probably lies with the washer. This problem could be traced to the drain tube (which comes out of the machine), the lid switch or the drain pump (an internal issue).

Is there an emergency drain on a washing machine? ›

You need the emergency drain when the washer door is closed or the machine displays an unbalanced load error (Ub). This process also covers cleaning the debris filter on the machine, which is a good thing to do every 2 months.

If that happens, carefully turn off the power to the washer, remove non-fixed items from the flooded area, and remove the floodwater. Call a restoration company if the water has penetrated the floor, walls, or other rooms. Then, have your washing machine inspected and repaired to prevent a washing machine overflow.

When a washing machine finishes a cycle sometimes water can remain in the drum where the machine hasn't been able to drain it correctly. It is also worth draining the machine before cleaning the filter to stop water from leaking out onto the floor while you are cleaning it.

When a washing machine finishes a cycle sometimes water can remain in the drum where the machine hasn't been able to drain it correctly. It is also worth draining the machine before cleaning the filter to stop water from leaking out onto the floor while you are cleaning it.

Use the emergency door release tab: On some washing machines (like Bosch, Hotpoint and Indesit models) you can open their doors manually by pulling down on a hidden release tab with a screwdriver. You'll usually find this inside a removable flap under the door.