How to block off holes underneath fence? (2024)

FAQs

How to block off holes underneath fence? ›

You can lay down stones before installing the paneling or use them to fill in gaps as they arise. This is an extremely cost-effective solution and they can be moved as needed. Similarly, a raised garden bed could be installed in front of the hole, and dirt can be used to fill the gap.

First and foremost, you'll need some sort of fill material to fill the gap. Options include soil, sand, gravel, or a combination of these materials. Make sure to choose a fill material that is compatible with the soil in your area and can withstand the pressure of the fence.

Cut a chain link mesh piece to the size of the fence gap, and use wire ties or clips to attach it to the bottom of the fence where there is a fence gap. For smaller gaps, using a sturdy wire mesh can be an easy and quick fix.

Fixing gaps under fences or gates can be as simple as piling stones, rocks, or concrete blocks over the unwanted space.

A kickboard, also known as a mud board or a baseboard, is a horizontal board that is installed at the bottom of a wood fence, usually between the ground and the first picket or board.

If you put up a fence to keep them out, be sure to extend wire meshing out in an “L” shape at or beneath the ground. L–footer style fencing will also keep wildlife out of yards and gardens.

You can use chicken wire, hardware cloth, or a piece of chain-link fence attached to the base of the fence. Some people bury it for aesthetic reasons. But you can also lay it on top of the grass and hold it down with rocks, gravel, mulch, or even planters. Pour a concrete footer.

The suggested gap for fences is generally around 1-2 inches. This range is adequate to prevent most small pests from burrowing beneath the fence. Having some form of gap is also beneficial to prevent wood fences from suffering water damage.

Tension Wire Installation: This involves attaching a heavy-gauge wire along the bottom of the fence and tightening it to pull the mesh tightly against the ground. Chain link fence bottom with wire helps to keep the fence line taut and minimizes gaps where animals could dig through.

Set in Gravel and Concrete

Fill the first three inches up with gravel so the end of the post doesn't come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.

How do you hide the bottom of a fence? ›

You can lay down stones before installing the paneling or use them to fill in gaps as they arise. This is an extremely cost-effective solution and they can be moved as needed. Similarly, a raised garden bed could be installed in front of the hole, and dirt can be used to fill the gap.

One of the easiest ways to fill in the gap is with dirt. You could also use rocks, lattice, pieces of wood, chicken wire, or even concrete. Pick a material that suits the shape and size of your gap. You might also like it to match the fence (if you have a white vinyl fence, white vinyl lattice may look best.)

Wood planks make great hole fillers because they can be cut and customized to fit the exact space you need. Wood planks can also be easily covered with foliage or gravel to hide the appearance of the filler.

Create a Barrier

For one, you could create a physical barrier between your yards. While some people ask us if a fence will stop weeds, it will not. That's because many weeds grow by “creeping,” so they'll just creep right under the fence. But you could create a mulched area that separates your yard from the neighbor's.

If it sneaks under the fence then perhaps you could dig plastic garden edging (widest you can get) into the soil to seal the gap between fence and soil. You'd need to put steel pegs (e.g. short star pickets) behind it to hold the pressure back.

Place large rocks, partially buried, along the bottom of the fence line. Bury the bottom of the fence one to two feet below the surface. Place chain link fencing on the ground (anchored to the bottom of the fence) to make it uncomfortable for your dog to walk near the fence.

The best way to seal a wooden fence is to thoroughly clean and prepare the surface, choose a high-quality wood sealant, and apply it evenly using a brush, roller, or sprayer. Following the manufacturer's instructions and allowing sufficient drying time is crucial for optimal results.