Selected Answer: B
When SSO is enabled on a Cisco router, the active and standby routers exchange state information periodically. In the event of a failure, the standby router assumes the role of the active router and begins forwarding traffic. This process is transparent to the network, and there is no interruption in service.Specifically, when SSO is enabled with HSRP, the standby router maintains a synchronized copy of the active router's HSRP state information, including the virtual IP address and MAC address. If the active router fails, the standby router can immediately take over as the active HSRP router and continue forwarding traffic using the same virtual IP and MAC addresses.Therefore, the correct answer is B. It ensures fast failover in the case of link failure.
upvoted 2 times
SSO has nothing to do with the failover in case of link failure. That is all HSRP.
upvoted 1 times
...
"SSO HSRP alters the behavior of HSRP when a device with redundant Route Processors (RPs) is configured for stateful switchover (SSO) redundancy mode. When an RP is active and the other RP is standby, SSO enables the standby RP to take over if the active RP fails."https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/15-sy/fhp-15-sy-book/fhp-hsrp-sso.pdfThe answer is D.
upvoted 1 times
...
...
FAQs
Cisco 350-401 exam comprises 90-110 questions which candidates have to finish in 120 minutes.
What is the format for 350-401 Encor exam? ›
CCNP 350-401 ENCOR Exam Format
The CCNP ENCOR Exam requires you to answer 90-110 questions within a time limit of 120 minutes. To pass the exam, you need to achieve a score of 750-850 out of a total of 1000 points. The exam covers the following topics: Architecture (15%)
How many questions are on the 350 701 SCOR exam? ›
Cisco 350-701 Exam Overview:
Exam Name | Implementing and Operating Cisco Security Core Technologies |
---|
Exam Price | $400 USD |
Duration | 120 minutes |
Number of Questions | 90-110 |
Passing Score | Variable (750-850 / 1000 Approx.) |
5 more rows
Which TLV value must be added to option 43 when DHCP is used to ensure that APS join the WLC? ›
The TLV should contain the IP address of the WLC, with which the AP needs to be associated. The hexadecimal string is assembled as a sequence of the TLV values for the Option 43 sub-option - Type + Length + Value . Type is always the code 0xf1 sub-option.
Does Encor 350 401 have labs? ›
The NetSim Network Simulator provides labs designed to help you achieve your Cisco certification. Each lab in the NetSim for Cisco 350-401 ENCOR is written to help you understand the technologies necessary to pass the Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification exam.
How hard is it to pass the CCNP? ›
CCNP exams are designed to assess a higher level of expertise in networking concepts and solutions compared to CCNA. So, it can be said that it is difficult to pass CCNP.
What is the pass rate for the CCNP exam? ›
CCNP Passing Scores. Given the exam's difficulty and focus on specialized network skills, the pass rate for the CCNP ENCOR 350-401 exam is around 75% on average.; Cisco never publishes the exam passing scores because test questions, as well as passing scores, are subject to change without prior notice.
What is the passing score for the CCNP Spcor exam? ›
Number of Questions : 90-110. Passing Score : Variable (750-850 / 1000 Approx.)
What is the passing score for the CCNA exam? ›
Passing score: This is also not published information, but a general rule tends to be around 80% correct answers to pass the exam. Question types: Performance-based simulations and questions that test theoretical knowledge are a part of the exam.
What is the purpose of Option 43? ›
An Option 43 packet can contain multiple vendor-specific pieces of information. It can also include encapsulated, vendor-specific extensions of data. Sent from client to server. List of configuration parameters (option codes) that a DHCP client is requesting, possibly in order of the client's preference.
--> Control Provisioning of Wireless Access Points is a standard protocol that enables a wireless LAN controller to manage access points. --> CAPWAP is based upon Light Weight Access Point Protocol. --> CAPWAP does not support layer 2 mode compared to LWAPP. --> CAPWAP is more secure to LWAPP.
What does option 60 do? ›
DHCP Option 60 is used to define the VCI (Vendor class identifier) on the DHCP server and it is the same VCI which is included in the initial DHCP discover message that a DHCP client broadcasts in search of an IP address. Option 60 is used by DHCP clients (Access Points) in order to identify itself to the DHCP server.
How long is the Cisco 350-401 exam? ›
1 (ENCOR 350-401) is a 120-minute exam associated with the CCNP and CCIE Enterprise Certifications.
What is the pass rate for the arm 401 exam? ›
ARM™ 401 Pass Rate
The pass rate is typically around 75% or lower. This means, out of everyone that attempts the ARM™ 401 exam, 75% pass.
How many questions are on the Cisco CCNP exam? ›
Consistency, a lot of hands-on labs, and having the best study materials are key, as it's not just about obtaining the certification but being able to apply the acquired skills to solve real-world issues. The Cisco CCNP ENCOR exam consists of approximately 102-120 multiple-choice, multiple-answer questions.