Types of Switches
Modular switches vs. fixed-configuration switches
There are two main categories of switches: modular and fixed configuration. There are variations among these categories of network switches, but the primary definition of each remains the same.
Modular switches
Modular switches let you add expansion modules as needed, giving you flexibility as network requirements change. Expansion modules are application-specific and include those for firewalls, wireless connectivity, or network analysis. They may also allow for additional interfaces, power supplies, or cooling fans. This type of switch provides you with the most flexibility, but at a higher cost.
Fixed-configuration switches
Fixed-configuration switches provide a fixed number of ports and are typically not expandable, which makes them less expensive overall. Fixed-configuration switches include unmanaged switches, smart switches, and managed switches.
Smart switches
Smart switches offer some management and segmentation, quality of service, and security capabilities, so they can be a cost-effective alternative to modular switches. Still, they are not as scalable as managed switches. These switches are typically deployed at the edge of a large network (while managed switches are used in the core), as the infrastructure for smaller networks, or for low complexity networks.
Feature Options
Four switch options to keep in mind
In addition to evaluating switch categories, you should also consider network switch speeds, number of ports, power-over-Ethernet features, and stacking capabilities.
- Switch speeds
Switches are available in different throughputs or speeds, the rate they transmit data in megabits per second (Mbps). For example, fixed-configuration switches can provide Fast Ethernet (10/100 Mbps), Gigabit Ethernet (10/100/1000 Mbps), Ten Gigabit (10/100/1000/10000 Mbps), and even 40/100 Gbps (gigabits per second) speeds. The switch speed you choose depends on the type of throughput you need. If, for example, you need to move large data files on a regular basis, you should consider a Gigabit Ethernet switch. - Number of ports
As is the case with switch speed, the number of ports available in a switch can vary. The bigger your small business and the more network users you have, the more ports you'll need. Fixed-configuration switches are usually available with five, eight, 10, 16, 24, 28, 48, or 52 ports. - Power over Ethernet (PoE) vs. non-PoE
PoE lets you power a device—such as an IP phone, surveillance camera, or wireless access point—over the cable that is used for data traffic. This allows you to place endpoints anywhere, even in those areas that are usually difficult to reach. Switches with PoE are more expensive, however. As you evaluate your options, think about the devices you would like to connect to determine whether PoE is required. - Stackable vs. standalone switches
As your business (and your network) grows, you will likely need to support more and more devices, which will mean investing in more switches. Just as its name implies, a standalone switch is managed and configured as an individual entity with limited capacity. If there is a problem, troubleshooting is also switch specific.
In contrast, stackable switches can be connected to increase the capacity and availability of your network. Rather than configuring, managing, and troubleshooting each switch, you can treat the "stack" as a single unit. This means that if any part of the stack fails, the stack will route around the failure, so your network keeps running.