After you set up the pass-through and destination servers,you can set up servers to connect to pass-through servers. Creatinga pass-through connection enables the server to forward requests fromusers and other servers to connect to a specified destination server.
Before you begin
Before creating a pass-through connection, verify that thecurrent server is not configured to use a default pass-through server.When a server is configured to use a default pass-through server andit receives a request to connect to a destination server for whichno other connection is defined, it attempts to route through the namedserver to the requested destination. If the named server is not setup to allow pass-through connections to the requested destinationserver, the pass-through attempt places an unnecessary load on bothservers. Complete these steps to verify that the server is notconfigured to use a default pass-through server:
- From the IBM® Domino® Administrator,click the Configuration tab.
- Click Server > CurrentServer document.
- Click the Basics tab and expand the ServerLocation Information section.
- Verify that the Passthru server field isempty.
- If the field is empty, complete the procedure to create a pass-throughconnection..
About this task
Thepass-through connection document specifies the server to use for pass-through,but does not define how to connect to the pass-through server. Ifa server does not have a direct connection to the pass-through serverover the LAN, you must create a separate connection document to definethe path to the pass-through server.
Procedure
- From the Domino® Administrator,click the Configuration tab.
- Select the connecting server's Domino® Directory in the Use Directoryon field.
- Click Server and then click Connections.
- Click Add Connection.
- Complete the following fields:
Table 1. Pass-through connectionfields and descriptions| Field | Description |
|---|
| Connection type | Select Pass-through server |
|---|
| Source server | The name of the server connecting to the pass-throughserver |
|---|
| Source domain | The name of the connecting server's domain |
|---|
| Use pass-through server or hunt group | The name of the pass-through server or huntgroup that this connection uses to reach the destination server |
|---|
| Usage priority | Choose one: - Normal (default) - Select this option if this document definesthe primary path to a server.
- Low - Select this option to define a backup path to a server.
Note: You can force Domino® touse a specific port by specifying it in the connection document andsetting the Usage priority field to Normal. |
|---|
| Destination server | The name of the destination server to connectto through the pass-through server. |
|---|
| Destination domain | The name of the destination server's domain |
|---|
- On the Replication/Routing and Schedule tabs,define the tasks you want to run and select the times you want theserver to call its destination.
- Click Save and Close.
FAQs
Pass-through is a process that runs on a server and establishes connections between the users and servers connected to that server and other servers. Pass-through connections use an intermediary server as a "stepping stone" to connect the two servers.
How to create a passthrough query in Access? ›
Create a pass-through query
- Connect to a server database. ...
- Select Create > Query Design.
- If necessary, close the Add Tables dialog box (Show Table in Access.
- Select Design >Pass-Through. ...
- If the query property sheet does not appear, press F4 to display it.
SQL pass-through queries are used to send commands directly to an ODBC database server. By using an SQL pass-through query, you work directly with the server tables instead of having the Microsoft Jet database engine process the data.
What is a pass-through in data? ›
Passthrough functions send requests to execute operations within your connected data platform, then return the response generated by your data platform's native functions.
How to set up IP passthrough? ›
Setting Up IP Passthrough
This is typically achieved through a web browser by entering the router's IP address into the address bar. Once you have logged into the router's dashboard, you should navigate to the section labeled “IP Passthrough,” “DMZ,” or a similarly named option, depending on your router's firmware.
What is the purpose of a pass through? ›
The IRS explains that S corps are pass-through entities because they “pass corporate income, losses, deductions, and credits through to their shareholders for federal tax purposes,” enabling the entity to avoid double taxation on the corporate income.
How do you pass a parameter to a query in Access? ›
Create a parameter query
- Create a select query, and then open the query in Design view.
- In the Criteria row of the field you want to apply a parameter to, enter the text that you want to display in the parameter box, enclosed in square brackets. ...
- Repeat step 2 for each field you want to add parameters to.
On the Database Tools tab, in the Relationships group, click Relationships. On the Relationships Design tab, in the Relationships group, click Add Tables. Select one or more tables or queries and then click Add. After you have finished adding tables and queries to the Relationships document tab, click Close.
How do I create a custom query in Access? ›
Select Create > Query Wizard . Select Simple Query, and then OK. Select the table that contains the field, add the Available Fields you want to Selected Fields, and select Next. Choose whether you want to open the query in Datasheet view or modify the query in Design view, and then select Finish.
What is pass-through method? ›
In economics, cost pass-through (also known as price transmission or simply pass-through) is a process (or result) of a business changing pricing of its output (products or services) to reflect a change in costs of its own input (materials, labor, etc.).
The passthrough SQL feature enables you to send a statement directly to a non-Oracle system without first being interpreted by Oracle Database. This feature can be useful if the non-Oracle system allows for operations in statements for which there is no equivalent in Oracle.
What is a pass-through clause? ›
Pass-through clauses (a.k.a. flow-down or conduit clauses), typically incorporate by reference the terms of a prime contract between owner and general contractor into a subcontract, thereby binding subcontractors to the same duties and obligations – and to the same extent – as the general contractor has to the owner.
How does a pass through work? ›
A flow-through or pass-through entity is a legal business that passes all its income on to the owners or investors of the business. Flow-through entities are a common device used to avoid double taxation on earnings.
What is an example of passing through? ›
Pass-through Sentence Examples
- The streets are joined by alleys just wide enough to pass through. ...
- Demons cannot pass through it, but your death dealers can. ...
- The current from the line was made to pass through the spring and paper to the cylinder. ...
- Any organism may pass through a series of free-living larval stages.
What does that mean, exactly? In IP passthrough mode, your personal router gets the public IP address, but other devices connected directly to the modem/router will get local IP addresses and still be able to connect to the internet through the modem/router's network address translation (NAT).
What is a pass through connector used for? ›
Pass-through connectors are used in high-speed data transmission, audio/video connections, and networking where signal integrity and data transfer speed are critical.
What is a bypass connection? ›
A bypass connection is a pipe connection between the suction and discharge side of a booster set in order to bypass water when the pumps are not in operation. The pipe diversion consists of a manifold, two isolating valves and a non-return valve.
What does a pass through device do? ›
A passthrough device is used in conjunction with a computer to reprogram vehicle control modules through the OBD-II/CANbus port.
