- Article
Microsoft Entra ID stores audit events for up to 30 days in the audit log. However, you can keep the audit data for longer than the default retention period, outlined in How long does Microsoft Entra ID store reporting data?, by routing it to an Azure Storage account or using Azure Monitor. You can then use workbooks and custom queries and reports on this data.
Configure Microsoft Entra ID to use Azure Monitor
Tip
Steps in this article might vary slightly based on the portal you start from.
Before you use the Azure Monitor workbooks, you must configure Microsoft Entra ID to send a copy of its audit logs to Azure Monitor.
Archiving Microsoft Entra audit logs requires you to have Azure Monitor in an Azure subscription. You can read more about the prerequisites and estimated costs of using Azure Monitor in Microsoft Entra activity logs in Azure Monitor.
Sign in to the Microsoft Entra admin center as at least a Security Administrator. Make sure you have access to the resource group containing the Azure Monitor workspace.
Browse to Identity > Monitoring & health > Diagnostic settings.
Check if there's already a setting to send the audit logs to that workspace.
If there isn't already a setting, select Add diagnostic setting. Use the instructions in Integrate Microsoft Entra logs with Azure Monitor logs to send the Microsoft Entra audit log to the Azure Monitor workspace.
After the log is sent to Azure Monitor, select Log Analytics workspaces, and select the workspace that contains the Microsoft Entra audit logs.
Select Usage and estimated costs and select Data Retention. Change the slider to the number of days you want to keep the data to meet your auditing requirements.
Later, to see the range of dates held in your workspace, you can use the Archived Log Date Range workbook:
Browse to Identity > Monitoring & health > Workbooks.
Expand the section Microsoft Entra Troubleshooting, and select on Archived Log Date Range.
View events for an access package
To view events for an access package, you must have access to the underlying Azure monitor workspace (see Manage access to log data and workspaces in Azure Monitor for information) and in one of the following roles:
- Global Administrator
- Security Administrator
- Security Reader
- Reports Reader
- Application Administrator
Use the following procedure to view events:
In the Microsoft Entra admin center, select Identity then select Workbooks. If you only have one subscription, move on to step 3.
If you have multiple subscriptions, select the subscription that contains the workspace.
Select the workbook named Access Package Activity.
In that workbook, select a time range (change to All if not sure), and select an access package ID from the drop-down list of all access packages that had activity during that time range. The events related to the access package that occurred during the selected time range is displayed.
Each row includes the time, access package ID, the name of the operation, the object ID, UPN, and the display name of the user who started the operation. More details are included in JSON.
If you would like to see if there have been changes to application role assignments for an application that weren't due to access package assignments, such as by a Global Administrator directly assigning a user to an application role, then you can select the workbook named Application role assignment activity.
Create custom Azure Monitor queries using the Microsoft Entra admin center
You can create your own queries on Microsoft Entra audit events, including entitlement management events.
In Identity of the Microsoft Entra admin center, select Logs under the Monitoring section in the left navigation menu to create a new query page.
Your workspace should be shown in the upper left of the query page. If you have multiple Azure Monitor workspaces, and the workspace you're using to store Microsoft Entra audit events isn't shown, select Select Scope. Then, select the correct subscription and workspace.
Next, in the query text area, delete the string "search *" and replace it with the following query:
AuditLogs | where Category == "EntitlementManagement"Then select Run.
The table shows the Audit log events for entitlement management from the last hour by default. You can change the "Time range" setting to view older events. However, changing this setting will only show events that occurred after Microsoft Entra ID was configured to send events to Azure Monitor.
If you would like to know the oldest and newest audit events held in Azure Monitor, use the following query:
AuditLogs | where TimeGenerated > ago(3653d) | summarize OldestAuditEvent=min(TimeGenerated), NewestAuditEvent=max(TimeGenerated) by TypeFor more information on the columns that are stored for audit events in Azure Monitor, see Interpret the Microsoft Entra audit logs schema in Azure Monitor.
Create custom Azure Monitor queries using Azure PowerShell
You can access logs through PowerShell after you configure Microsoft Entra ID to send logs to Azure Monitor. Then, send queries from scripts or the PowerShell command line, without needing to be a Global Administrator in the tenant.
Ensure the user or service principal has the correct role assignment
Make sure you, the user or service principal that authenticates to Microsoft Entra ID, are in the appropriate Azure role in the Log Analytics workspace. The role options are either Log Analytics Reader or the Log Analytics Contributor. If you're already in one of those roles, then skip to Retrieve Log Analytics ID with one Azure subscription.
To set the role assignment and create a query, do the following steps:
In the Microsoft Entra admin center, locate the Log Analytics workspace.
Select Access Control (IAM).
Then select Add to add a role assignment.
Install Azure PowerShell module
Once you have the appropriate role assignment, launch PowerShell, and install the Azure PowerShell module (if you haven't already), by typing:
install-module -Name az -allowClobber -Scope CurrentUserNow you're ready to authenticate to Microsoft Entra ID, and retrieve the ID of the Log Analytics workspace you're querying.
Retrieve Log Analytics ID with one Azure subscription
If you have only a single Azure subscription, and a single Log Analytics workspace, then type the following to authenticate to Microsoft Entra ID, connect to that subscription, and retrieve that workspace:
Connect-AzAccount$wks = Get-AzOperationalInsightsWorkspaceRetrieve Log Analytics ID with multiple Azure subscriptions
Get-AzOperationalInsightsWorkspace operates in one subscription at a time. So, if you have multiple Azure subscriptions, you want to make sure you connect to the one that has the Log Analytics workspace with the Microsoft Entra logs.
The following cmdlets display a list of subscriptions, and find the ID of the subscription that has the Log Analytics workspace:
Connect-AzAccount$subs = Get-AzSubscription$subs | ftYou can reauthenticate and associate your PowerShell session to that subscription using a command such as Connect-AzAccount –Subscription $subs[0].id. To learn more about how to authenticate to Azure from PowerShell, including non-interactively, see Sign in with Azure PowerShell.
If you have multiple Log Analytics workspaces in that subscription, then the cmdlet Get-AzOperationalInsightsWorkspace returns the list of workspaces. Then you can find the one that has the Microsoft Entra logs. The CustomerId field returned by this cmdlet is the same as the value of the "Workspace ID" displayed in the Microsoft Entra admin center in the Log Analytics workspace overview.
$wks = Get-AzOperationalInsightsWorkspace$wks | ft CustomerId, NameSend the query to the Log Analytics workspace
Finally, once you have a workspace identified, you can use Invoke-AzOperationalInsightsQuery to send a Kusto query to that workspace. These queries are written in Kusto query language.
For example, you can retrieve the date range of the audit event records from the Log Analytics workspace, with PowerShell cmdlets to send a query like:
$aQuery = "AuditLogs | where TimeGenerated > ago(3653d) | summarize OldestAuditEvent=min(TimeGenerated), NewestAuditEvent=max(TimeGenerated) by Type"$aResponse = Invoke-AzOperationalInsightsQuery -WorkspaceId $wks[0].CustomerId -Query $aQuery$aResponse.Results |ftYou can also retrieve entitlement management events using a query like:
$bQuery = 'AuditLogs | where Category == "EntitlementManagement"'$bResponse = Invoke-AzOperationalInsightsQuery -WorkspaceId $wks[0].CustomerId -Query $Query$bResponse.Results |ft Using query filters
You can include the TimeGenerated field to scope a query to a particular time range. For example, to retrieve the audit log events for entitlement management access package assignment policies being created or updated in the last 90 days, you can supply a query that includes this field as well the category and operation type.
AuditLogs | where TimeGenerated > ago(90d) and Category == "EntitlementManagement" and Result == "success" and (AADOperationType == "CreateEntitlementGrantPolicy" or AADOperationType == "UpdateEntitlementGrantPolicy") | project ActivityDateTime,OperationName, InitiatedBy, AdditionalDetails, TargetResourcesFor audit events of some services such as entitlement management, you can also expand and filter on the affected properties of the resources being changed. For example, you can view just those audit log records for access package assignment policies being created or updated, that don't require approval for users to have an assignment added.
AuditLogs | where TimeGenerated > ago(90d) and Category == "EntitlementManagement" and Result == "success" and (AADOperationType == "CreateEntitlementGrantPolicy" or AADOperationType == "UpdateEntitlementGrantPolicy") | mv-expand TargetResources | where TargetResources.type == "AccessPackageAssignmentPolicy" | project ActivityDateTime,OperationName,InitiatedBy,PolicyId=TargetResources.id,PolicyDisplayName=TargetResources.displayName,MP1=TargetResources.modifiedProperties | mv-expand MP1 | where (MP1.displayName == "IsApprovalRequiredForAdd" and MP1.newValue == "\"False\"") |order by ActivityDateTime desc Next steps
- Create interactive reports with Azure Monitor workbooks
- Create custom alerts for Microsoft Entra ID Governance
