FAQs
Answer a call: Press the stem once on either of your AirPods. Note: If you turn on announce calls, you can also answer or decline a call using your voice. End a call: Double-press the stem on either of your AirPods.
Why are my AirPods Pro 2nd gen so quiet? ›
If your AirPods volume is too low only when you use them with your iPhone, go into the Settings app, then Sound & Haptics > Headphone Safety. Make sure the 'Reduce Loud Sounds' toggle switch is set to 'off. You should also check Accessibility settings, as these can sometimes make your AirPods too quiet.
Are the AirPods Pro 2nd generation good for working out? ›
I've tested dozens of wireless earbuds as workout companions over the years, and have settled on Apple's AirPods Pro 2 as my go-to gym buddy. They rank among the best workout headphones and are the perfect addition to my iPhone.
Why are my AirPods Pro 2 not working? ›
Update your iPhone or iPad to the latest version of iOS or iPadOS. Put both AirPods in the charging case and make sure that both AirPods are charging. To make sure that Bluetooth is on, go to Settings > Bluetooth. If your AirPods are connected, make sure that they're selected as your audio device.
Why can't I answer calls on my AirPods Pro? ›
To fix this, users can grant microphone access in Settings, clean the AirPods, or get them replaced at an Apple service center. Another solution is to change the microphone settings in the AirPods settings. By selecting either the left or right earbud as the microphone input, users can resolve the calling issue.
How do I make my AirPod Pro 2nd Gen louder? ›
To turn the volume up or down, place your thumb on the stem of either AirPod, and use your index finger to swipe up or down on the Touch control.
Do AirPods pros get quieter over time? ›
Your AirPods spend a lot of time in your ears, which can lead to waxy buildup. Even a small amount of buildup over the speakers inside of your AirPods can significantly lower the volume.
Why is one AirPod Pro 2 louder than the other? ›
If one AirPod is louder or quieter than the other
Check the microphone and speaker mesh on each AirPod. If there's any debris, clean your AirPods or clean your AirPods Pro. Go to Settings > Accessibility > Audio/Visual > Balance, and make sure that the balance is set in the middle.
Will sweat ruin AirPods Pro 2? ›
AirPods Pro 2 with MagSafe Charging Case (USB-C) are dust resistant and sweat and water resistant for non-water sports and exercise, and have a rating of IP54 under IEC standard 60529. AirPods Pro and AirPods 3 are sweat and water resistant, but they are not waterproof or sweatproof.
Can you wear AirPods 2nd gen in the rain? ›
AirPods (1st and 2nd Gen) – These have little to no water resistance and they won't cope well with moisture or water. So, you'll have to be extra careful. AirPods Pro – They're rated as IPX4 water resistant. Making them suitable for a little bit of rain and your workouts at the gym.
Do Airpods Stay In While Running? Well, most of the time, they do. I get very, very sweaty when I workout – like on a scale of 1-10, I'm almost always in the 8-10 range. These have not fallen out in any workout except running.
How many years will AirPods Pro 2 last? ›
After two or three years of regular use, the batteries in AirPods can start to degrade to the point of being eventually unusable. If you find yourself regularly losing power part way through the day, then it's probably time to either pass them on or recycle them. These are great ways to extend their lifespan.
Why are my AirPods so quiet on full volume? ›
It could be, for example, that the battery is nearly out of power or accessibility settings on your Mac or iPhone are limiting the volume. Also, if you're close to the edge of their Bluetooth range, performance may be erratic, and that could include your AirPods' volume being too low.
How do I force AirPods Pro 2 to update? ›
If you're paired to your iPhone and no update seems to be happening, put your AirPods earbuds back in their charging case, connect it to a power source, and re-pair the device to force an update. As long as your iOS device firmware is up to date, it shouldn't have any issue pulling down your AirPods firmware update.
What are the controls for AirPods 2nd gen? ›
AirPods Pro (2nd generation) controls
Play and pause audio: Press the stem. To resume playback, press it again. Play the next track: Double-press the stem. Play the previous track: Triple-press the stem.
How do I reply back on AirPods? ›
After using Siri to read a message, say something like “Reply that's great news.” Your message is repeated, and you're asked for confirmation before it's sent.
Where is the button on AirPods 2nd Gen? ›
The button on the back of your AirPods case is the setup button and is used in some cases when pairing them with your device.
How do you press AirPods 2? ›
To play and pause audio, press the force sensor on the stem of an AirPod. To resume playback, press again. To skip forward, double-press the force sensor. To skip back, triple-press the force sensor.